Chinese liquid concrete sealing and curing agent, deep penetration,
crystallization, penetration, sealing, enhancing wea
SV-PSM curing agent
Non surface film-forming, deep penetration crystallization,
penetration sealing, enhanced wear resistance, chemical corrosion
resistance and aging resistance
1. Product Introduction
SV-PSM curing agent is a nano-scale waterborne inorganic concrete
sealing curing agent, formulated by special technology. Through
strong permeability and chemical components in concrete and cement
floor chemical reaction, in the ground 3-9 mm three-dimensional
space to form an overall network distribution and solidification,
so as to densify the concrete, in the overall surface strength,
wear resistance, impermeability, dust, slip and aging resistance of
concrete to show excellent quality, prolong the service life of
concrete.
2. Product features
Concrete sealing curing agent is a water-based compound, which does
not contain formaldehyde, heavy metals, non-toxic, odorless,
non-flammable, TVOC is far lower than the national standard.
3. Scope of Application
concrete flooring; terrazzo floor ; Emery floor ; Cement floor;
Hard floors such as epoxy floors.
4. Product advantages
Hard and wear-resistant; Effective sealing; Thoroughly dustproof;
Good aging resistance; Good acid and alkali resistance; Bright and
non-slip; Durable; Green ; Strong penetration; No alkali return, no
whitish.
5. How to Use
Clean the floor first, or with water. In the absence of open water:
the product and water (non-alkaline water) are diluted 1:8-1:9,
depending on the situation, taking the new floor or wall as an
example, to about 0.3-0.35kg/㎡ dosage spray the product on the
ground or wall, pay attention to observe the ground or wall after
spraying the curing agent, if there is a place where it accumulates
or dries thoroughly, use dust to push evenly or properly supplement
the liquid to ensure that the curing agent on the floor penetrates
evenly.
The effect of mopping is more significant during ground
construction, moisturizing for 30-40 minutes each time; After
drying, a second construction is carried out. Depending on the
intensity requirements of each time, the operation can be repeated
or repeated.
The wall is constructed by a combination of horizontal spraying and
longitudinal spraying.
6. Precautions
6.1 It is best to work outdoors in the afternoon to prevent the sun
from drying too quickly at noon.
6.2 According to the strength of different grounds, the soaking
material process can be repeated many times.
7. Packaging and Storage
Packing: 25kg/bag ,1ton/bag or customized according to customer
needs.
Storage: Store in a cool, dry place with a shelf life of 12 months.
